• ASTM D4814-11a

ASTM D4814-11a

Standard Specification for Automotive Spark-Ignition Engine Fuel

ASTM International , 10/01/2011

Publisher: ASTM

File Format: PDF

$43.00$86.00


1.1 This specification covers the establishment of requirements of automotive fuels for ground vehicles equipped with spark-ignition engines.

1.2 This specification describes various characteristics of automotive fuels for use over a wide range of operating conditions. It provides for a variation of the volatility and water tolerance of automotive fuel in accordance with seasonal climatic changes at the locality where the fuel is used. For the period May 1 through Sept. 15, the maximum vapor pressure limits issued by the U.S. Environmental Protection Agency (EPA) are specified for each geographical area except Alaska and Hawaii. Variation of the antiknock index with seasonal climatic changes and altitude is discussed in Appendix X1. This specification neither necessarily includes all types of fuels that are satisfactory for automotive vehicles, nor necessarily excludes fuels that can perform unsatisfactorily under certain operating conditions or in certain equipment. The significance of each of the properties of this specification is shown in Appendix X1.

1.3 The spark-ignition engine fuels covered in this specification are gasoline and its blends with oxygenates, such as alcohols and ethers. This specification does not apply to fuels that contain an oxygenate as the primary component, such as Fuel Methanol (M85). The concentrations and types of oxygenates are not specifically limited in this specification. However, depending on oxygenate type, as oxygenate content increases above some threshold level, the likelihood for vehicle problems also increases. The composition of both unleaded and leaded fuel is limited by economic, legal, and technical consideration, but their properties, including volatility, are defined by this specification. In addition, the composition of unleaded fuel is subject to the rules, regulations, and Clean Air Act waivers of the U.S. Environmental Protection Agency (EPA). With regard to fuel properties, including volatility, this specification can be more or less restrictive than the EPA rules, regulations, and waivers. Refer to Appendix X3 for discussions of EPA rules relating to fuel volatility, lead and phosphorous contents, deposit control additive certification, and use of oxygenates in blends with unleaded gasoline. Contact the EPA for the latest versions of the rules and additional requirements.

1.4 This specification does not address the emission characteristics of reformulated spark-ignition engine fuel. Reformulated spark-ignition engine fuel is required in some areas to lower emissions from automotive vehicles, and its characteristics are described in the research report on reformulated spark-ignition engine fuel. However, in addition to the legal requirements found in this research report, reformulated spark-ignition engine fuel should meet the performance requirements found in this specification.

ASTM D4814-11a History

ASTM D4814-23a

ASTM D4814-23a

$54.00 $108.00

ASTM D4814-23

ASTM D4814-23

$54.00 $108.00

ASTM D4814-22

ASTM D4814-22

$49.00 $98.00

ASTM D4814-21b

ASTM D4814-21b

$46.00 $92.00

ASTM D4814-21c

ASTM D4814-21c

$49.00 $98.00

ASTM D4814-20a

ASTM D4814-20a

$44.00 $89.00

ASTM D4814-20

ASTM D4814-20

$43.00 $86.00

ASTM D4814-20b

ASTM D4814-20b

$44.00 $89.00

ASTM D4814-19

ASTM D4814-19

$43.00 $86.00

ASTM D4814-18b

ASTM D4814-18b

$44.00 $89.00

ASTM D4814-18a

ASTM D4814-18a

$41.00 $83.00

ASTM D4814-18d

ASTM D4814-18d

$43.00 $86.00

ASTM D4814-18c

ASTM D4814-18c

$41.00 $83.00

ASTM D4814-16d

ASTM D4814-16d

$41.00 $83.00

ASTM D4814-16b

ASTM D4814-16b

$41.00 $83.00

ASTM D4814-16c

ASTM D4814-16c

$41.00 $83.00

ASTM D4814-16ee1

ASTM D4814-16ee1

$41.00 $83.00

ASTM D4814-16

ASTM D4814-16

$41.00 $83.00

ASTM D4814-16a

ASTM D4814-16a

$41.00 $83.00

ASTM D4814-15a

ASTM D4814-15a

$41.00 $83.00

ASTM D4814-14

ASTM D4814-14

$43.00 $86.00

ASTM D4814-14a

ASTM D4814-14a

$43.00 $86.00

ASTM D4814-13b

ASTM D4814-13b

$43.00 $86.00

ASTM D4814-13

ASTM D4814-13

$43.00 $86.00

ASTM D4814-13a

ASTM D4814-13a

$43.00 $86.00

ASTM D4814-12

ASTM D4814-12

$43.00 $86.00

ASTM D4814-11b

ASTM D4814-11b

$43.00 $86.00

ASTM D4814-11a

ASTM D4814-11a

$43.00 $86.00

ASTM D4814-10

ASTM D4814-10

$43.00 $86.00

ASTM D4814-10b

ASTM D4814-10b

$43.00 $86.00

ASTM D4814-09

ASTM D4814-09

$43.00 $86.00

ASTM D4814-09b

ASTM D4814-09b

$43.00 $86.00

ASTM D4814-09a

ASTM D4814-09a

$43.00 $86.00

ASTM D4814-08a

ASTM D4814-08a

$43.00 $86.00

ASTM D4814-08b

ASTM D4814-08b

$43.00 $86.00

More ASTM Standards PDF

ASTM D7360-11

ASTM D7360-11

$29.00 $58.00

ASTM D6104-97(2011)

ASTM D6104-97(2011)

$30.00 $60.00

ASTM E2629-11

ASTM E2629-11

$29.00 $58.00

ASTM C857-11

ASTM C857-11

$30.00 $60.00