• AWWA WQTC71606

AWWA WQTC71606

The UV Intensity Setpoint Approach Re-defined: Using Validated Calculated Dose Algorithms to Develop Online Dose Monitoring Strategies That Do Not Require UVT Input

American Water Works Association , 11/01/2009

Publisher: AWWA

File Format: PDF

$12.00$24.00


During ultraviolet (UV) reactor validation, dose delivery, defined as Reduction Equivalent Dose (RED), is typically quantified across different operating conditions of flow rate, UV transmittance (UVT), lamp output and in some cases, lamp status. Empirical models (calculated dose algorithms) are then developed from the validation data to express the measured RED as a function of the different operating parameters. At installations, these algorithms are used to calculate the RED, given operating conditions of each parameter. An alternative dose-monitoring strategy, known as the UV intensity setpoint approach, can be defined by quantifying a UV reactor's RED as a function of flow and lamp output. Per the German UV guidelines (DVGW) intensity setpoint approach, the RED is confirmed at two test points with the reactor operating at a fixed flow and lamp output (setpoint UV intensity); one at high UVT but with lamp power reduced till the UV intensity matches the setpoint, and the other at maximum power but with UVT reduced until the UV intensity matches the setpoint. In the field, a UV reactor is credited with the validated RED if the measured flow does not exceed the validated flow and the measured UV intensity matches or exceeds the setpoint UV intensity. In this paper, a new method is described whereby the calculated dose approach was used to define an online dose-monitoring strategy that, like the UV intensity setpoint approach, does not require UVT input. Includes figures.

More AWWA Standards PDF

AWWA ACE61813

AWWA ACE61813

$12.00 $24.00

AWWA JTMGT61352

AWWA JTMGT61352

$12.00 $24.00

AWWA WQTC62471

AWWA WQTC62471

$12.00 $24.00

AWWA ACE61812

AWWA ACE61812

$12.00 $24.00