BS PD CEN ISO/TS 14907-1:2015

BS PD CEN ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-boardequipment (OBE) with regard to the conformance to standards and requirements for type approval andacceptance testing which is within the realm of EFC application specifically.The scope of this part of ISO/TS 14907 is restricted to systems operating within the radio emission,electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries inwhich they are operated.This part of ISO/TS 14907 identifies a set of suitable parameters and provides test procedures to enablethe proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to thedefined requirements of an application. The defined parameter and tests are assigned to the followinggroups of parameters:

• functionality;
• quality;
• referenced pre-tests.

An overview of the tests and parameters provided by this part of ISO/TS 14907 is given in 5.1 and 5.2.This part of ISO/TS 14907 describes procedures, methods and tools, and a test plan which showsthe relation between all tests and the sequence of these tests. It lists all tests that are required tomeasure the performance of EFC equipment. It describes which EFC equipment is covered by the testprocedures; the values of the parameters to be tested are not included. It also describes how the testsare to be performed and which tools and prerequisites are necessary before this series of tests can beundertaken. It is assumed that the security of the system is inherent in the communications and EFCfunctionality tests, therefore they are not addressed here. All tests in this part of ISO/TS 14907 provideinstructions to evaluate the test results.The test procedures can be used for prototype testing, type approvals, test of installations, andperiodic inspections. Thus this part of ISO/TS 14907 defines only the test and test procedures, not thebenchmark figures that these are to be measured against.Related to a conceptual model of an EFC system, this part of ISO/TS 14907 relates only to the equipmentof the user and the service provider as illustrated in Figure 1. Any other entities are outside the scope ofthis part of ISO/TS 14907.Cross References:ISO/IEC 17025ISO/IEC 17065:2012ISO/IEC 2382-1:1993ISO 9000:2005ISO 9001ISO 9004ISO 11451-2ISO 14906ISO/TS 14907-2ISO/IEC 15408-1:2009ISO/IEC 15408-2:2008ISO/IEC 15408-3:2008EN 60721-3-3EN 60721-3-5CEN/TC 278 [N318]:1994ENV 50204ETSI/TS 102 486-1ETSI/TS 102 486-2EN 12253:2004EN 12795:2003EN 12834:2003EN 13372:200472/245/EEC:1995ETSI EN 300 674-1EN 61000-6-3IEC 61000-6-3:2006EN 61000-6-1IEC 61000-6-1:2005EN 55015CISPR 15:2000EN 55022CISPR 22:2008IEC 61000-4-2IEC 61000-4-4IEC 61000-4-5IEC 61000-4-6IEC 61000-4-11IEC 60068-1:1988IEC 60068-2-1:1990IEC 60068-2-2:1974IEC 60068-2-5:1975IEC 60068-2-6:1995IEC 60068-2-10IEC 60068-2-11IEC 60068-2-14:1984IEC 60068-2-17:1994 IEC 60068-2-27:1987IEC 60068-2-29:1987IEC 60068-2-30:1980IEC 60068-2-32:1975IEC 60068-2-64:1993IEC 60068-2-42IEC 60068-2-43IEC 60068-2-46IEC 60068-2-49IEC 60068-2-52IEC 60068-2-52:1996IEC 60068-2-78IEC 60068-2-78:2001IEC 60068-3-4 IEC 60068-3-4:2001IEC 60529IEC 60721-3-3IEC 60721-3-3:2002 IEC 60721-3-5EN 300 674-1ETSI EN 300 674-1 V1.2.1ETSI/TS 102 486-1-2 V1.2.1ETSI/TS 102 486-2-2 V1.2.1ISO 7637-1ISO 7637-2 ISO 11451-2ISO 11451-3EN 50413IEC Guide 107ARIB STD-T75ARIB STD-TR-T16ISO/TS 17444-1:2012ISO/TS 17444-2:2013ISO/TS 19299:2015