BS PD ISO/TS 19880-1:2016

Gaseous hydrogen. Fuelling stations-General requirements

BSI Group , 07/31/2016

Publisher: BS

File Format: PDF

$199.00$398.78


BS PD ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate,for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light dutyland vehicles (e.g. Fuel Cell Electric Vehicles).NOTE These recommendations are in addition to applicable national regulations and codes, which canprohibit certain aspects of this document.This document is applicable to fuelling for light duty hydrogen land vehicles, but it can also be used asguidance for fuelling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storagecapacities outside of current published fuelling protocol standards, such as SAE J2601.Residential applications to fuel land vehicles and non-public demonstration fuelling stations are notincluded in this Technical Specification.This Technical Specification provides guidance on the following elements of a fuelling station (seeFigure 1 and Figure 2):
  • hydrogen production/delivery system
  • delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydridestorage trailers;
  • on-site hydrogen generators using water electrolysis process or hydrogen generators using fuelprocessing technologies;
  • liquid hydrogen storage;
  • hydrogen purification systems, as applicable;
  • compression
  • gaseous hydrogen compression;
  • pumps and vaporizers;
  • gaseous hydrogen buffer storage;
  • pre-cooling device;
  • gaseous hydrogen dispensers.
Cross References:ASTM D7606-11ASTM D7650-13ASTM D7651-10EN 13480-1EN 13480-2EN 13480-3EN 13480-4EN 13480-5EN 13480-6EN 13480-7EN 13480-8ISO 834-1ISO 4126-1ISO 4126-2ISO 4414ISO 10286ISO 11114-1ISO 11114-4ISO 12100ISO 13849-1ISO 13849-2ISO 13850ISO 14113ISO 14687-2ISO 15649:2001ISO/TR 15916ISO 16110-1ISO 16111ISO 17268 ISO 21009-1ISO 21010ISO 21011ISO 21012ISO 21013-1 ISO 21013-2ISO 21013-3ISO 21028-1ISO 22734-1ISO 24490ISO 26142ISO 31000ISO/IEC 31010ISO/IEC/DIS 80079-36 ISO/IEC/DIS 80079-37.2ISO/IEC Guide 51ISO/IEC Guide 73IEC 60068-1IEC 60079-0IEC 60079-2IEC 60079-10-1IEC 60079-11 IEC 60079-14IEC 60079-17IEC 60079-19IEC 60079-20-1IEC 60079-25IEC 60204-1:2005IEC 60364IEC 60529IEC PT 61000-3-1IEC 61000-3-2IEC 61000-3-3IEC 61000-3-4IEC 61000-3-5IEC 61000-3-11IEC 61000-3-12IEC 61000-6-1IEC 61000-6-2IEC 61000-6-3IEC 61000-6-4IEC 61508IEC 61511 IEC 62061IEC 62305-1IEC 62305-2IEC 60364-4-41CGA G-5.5UN GTR No. 13SAE J2600:2015-08SAE J2601:2014-07SAE J2799:2014-04ISO 3864ISO 5817ISO 7000ISO 7751ISO 10628-1ISO 11114-2ISO 12944-7ISO 16528-1ISO 17398ISO 23208IEC 60079-4IEC 60079-6IEC 60079-30-1IEC 60417 IEC 60445IEC 60446IEC 60947-4-1IEC 61082-1IEC 61882 IEC 61069-7IEC 61340-4-1IEC 61340-5-1IEC 62023EN 764-7EN 1081EN 1503-2EN 1626EN 12434EN 13237EN 13371EN 13458-1EN 13458-2EN 13458-3EN 13501-2EN 13501-3EN 13530-1EN 13530-2EN 13648-1EN 13648-292/58/EEC94/9/EC97/23/EC99/92/EC2004/108/EC2006/42/ECIGC 075 07 ENSS 1740.16-1997BCGA CP41 - 2014BCGA CP33 - Rev 1 - 2012NFPA 2NFPA 55NFPA 70ASME A13.1 ASME B31CSA-HGV 4.3CGA G-5.5CAN/BNQ 1784-000/2007GB 50516-2010

More BS Standards PDF

BS 6636-2:1987

BS 6636-2:1987

$95.00 $190.50

BS 6868:1987

BS 6868:1987

$199.00 $398.78

BS 6161-14:1987

BS 6161-14:1987

$46.00 $93.98

BS 5723:1987

BS 5723:1987

$132.00 $264.16