• SAE J2665_200610

SAE J2665_200610

Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

SAE International , 10/01/2006

Publisher: SAE

File Format: PDF

$35.00$70.00


This test standard covers the procedure for measuring the permeation of fuel or fuel surrogates through test samples of elastomeric, plastic or composite materials, up to about 3 mm thick.

The method involves filling a test cup with the test fluid (fuel or fuel surrogate), sealing test sample over the open end of the cup, and then placing the sealed container into an oven at the desired test temperature and measuring the weight loss over time. Permeation rates are calculated from the rate of weight loss and the exposed area of the test sample.

Standard permeation test temperatures are 40 °C and 60 °C. Standard test fluids are Fuel C, Fuel CE10 and Fuel CM15. Other fluids, such as Fuel CMTBE15, and other volatile liquids may be tested according to this procedure as desired (SAE J1681). The method is not applicable for measuring permeation of higher boiling materials that will not completely evaporate from the exterior surface of the sample at the test temperature.

SAE J2665_200610 History

SAE J2665_201812

SAE J2665_201812

$41.00 $83.00

SAE J2665_200610

SAE J2665_200610

$35.00 $70.00

SAE J2665_200610

SAE J2665_200610

$35.00 $70.00

More SAE Standards PDF

SAE AS121651A

SAE AS121651A

$18.00 $37.00

SAE CPFD1_09F150

SAE CPFD1_09F150

$25.00 $50.00

SAE J2625_200802

SAE J2625_200802

$45.00 $90.00

SAE AS121751A

SAE AS121751A

$18.00 $37.00