By order of the publisher, historical UL documents are not returnable for any reason. Once you place an order for an historical document, we cannot issue a refund, credit, or exchange of any kind.
This new edition of UL 1777 is a periodic re-issuance to ensure that UL's Standards remain up-to-date with regard to format and editorial issues such as renumbering, repagination, correction of editorial errors, correction of cross-references, and updated titles of referenced Standards. No changes in requirements have been made.
1 Scope
1.1 These requirements cover metallic and nonmetallic chimney liners intended for field-installation into new or existing masonry chimneys that are used for the natural draft venting of Category I gas-fired, Type L vented oil-fired, and solid-fuel-fired residential-type appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000 degrees F (538 degrees C).
1.2 Chimney liners are intended to be installed in existing masonry chimneys with or without a liner of fire-clay tile, or to be used as a substitute for masonry fire-clay tile flue liners in new chimneys.
1.3 Chimney liners are intended to be installed in accordance with the Standard for Chimneys, Fireplaces, Vents, and Solid Fuel Burning Appliances, NFPA 211; and codes such as the BOCA National Mechanical Code, the Standard Mechanical Code, and the Uniform Mechanical Code.
1.4 Chimney liners as covered by these requirements are not intended for use with Category II, III, or IV gas burning appliances as defined by the National Fuel Gas Code, NFPA 54, or other appliances that result in condensation of corrosive acids on the liner of the chimney, or that create positive pressures in the chimney system.
This new edition of UL 1777 is a periodic re-issuance to ensure that UL's Standards remain up-to-date with regard to format and editorial issues such as renumbering, repagination, correction of editorial errors, correction of cross-references, and updated titles of referenced Standards. No changes in requirements have been made.
1 Scope
1.1 These requirements cover metallic and nonmetallic chimney liners intended for field-installation into new or existing masonry chimneys that are used for the natural draft venting of Category I gas-fired, Type L vented oil-fired, and solid-fuel-fired residential-type appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000 degrees F (538 degrees C).
1.2 Chimney liners are intended to be installed in existing masonry chimneys with or without a liner of fire-clay tile, or to be used as a substitute for masonry fire-clay tile flue liners in new chimneys.
1.3 Chimney liners are intended to be installed in accordance with the Standard for Chimneys, Fireplaces, Vents, and Solid Fuel Burning Appliances, NFPA 211; and codes such as the BOCA National Mechanical Code, the Standard Mechanical Code, and the Uniform Mechanical Code.
1.4 Chimney liners as covered by these requirements are not intended for use with Category II, III, or IV gas burning appliances as defined by the National Fuel Gas Code, NFPA 54, or other appliances that result in condensation of corrosive acids on the liner of the chimney, or that create positive pressures in the chimney system.
